ChilLED Growcraft X6 – 1000 Watt DIY LED Grow Light Kit

The ChilLED Tech Growcraft X6 - 1000 Watt DIY LED Grow Light Kit was designed to give you the best possible yields. This high-performance fixture provides a large footprint, fits easily in any environment, and its brightness can be adjusted between 5% and 100% to reduce operational costs, making it a perfect replacement for traditional HPS bulbs.

The X6's passive cooled design has no moving part so the system’s heat dissipates slowly with minimal noise. Using the included dimmer you can adjust the light intensity according to your plant’s growth stage and simultaneously reduce operational costs. 

The X6 has been designed to support all the growth stages of a plant’s life cycle. The LEDs in this quality grow light emit a full spectrum, giving your indoor plants a welcomed boost. The ChilLED X6 1000 watt LED grow light outperforms regular HPS bulbs without breaking a sweat. It boosts the growth of plant yield and profits by 70% without increasing the operational costs, heat, energy costs, and cooling expenditures.

  • Large footprint for even canopy coverage
  • Only 1.375" thick, slim profile and passive cooled design so there are no moving parts
  • Linear Power Control: 50W – 1,000W dimmable range
  • Light Engine Efficacy: 3.26 μmole/J – 2.73 μmole/J
  • Full System Efficacy: 3.08 μmole/J – 2.58 μmole/J
  • Made In The USA


What's Included

  • 2 x Growcraft DIY U-Frame – 4×4
  • 2 x Growcraft DIY U-Frame Cover – 4×4
  • 2 x Growcraft Power Distribution PCB – 4×4
  • 6 x Growcraft 40in Heatsink
  • 6 x Growcraft 40in LED Board
  • 1 x M3 – 6mm Plastite PCB Screw – 25 pack
  • 1 x M3 – 8mm Plastite PCB Screw – 25 pack
  • 1 x M3 – 5mm Countersunk Torx Screw – 25 pack
  • 1 x M4 – 14mm Torx Screw – 25 pack
  • 6 x Growcraft PCB End Cover 2 Pack – ChilLED WHITE
  • 2 x Growcraft Strain Relief Cable Gland – Black
  • 1 x 20 AWG Red & Black Solid Core Wire Pair – 6ft
  • 2 x Growcraft 48Vdc LED Power Cable – 7ft
  • 2 x 120VAC USA Power Cord – 6.5ft
  • 2 x MEAN WELL HLG-480H-48B LED Driver
  • 3 x WAGO 221-412 Wire Splicing Connector (5 Pack)
  • 2 x Dimmer Pot
  • 1 x Growcraft DIY U-Frame Hole Plug
  • 4 x Rope Ratchets
  • 1 x T10 & T20 Torx Bit Pack

Growcraft Yield Max Flowering | Full Cycle Spectrum


Growcraft Yield Max Vegetative Spectrum


PAR Intensity Maps

5’x5′ Canopy Area – 12 in Hanging Height
Average PPFD – 1187 µmol/(m2s)

5’x5′ Canopy Area – 18 in Hanging Height
Average PPFD – 1077 µmol/(m2s)

5’x5′ Canopy Area – 24 in Hanging Height
Average PPFD – 971 µmol/(m2s)



5’x5′ Canopy Area – 30 in Hanging Height
Average PPFD – 829 µmol/(m2s)


Growcraft X6 1000W Product Details

  • Input Voltage Range: 90-305 VAC
  • 120 VAC Current Draw: 8.4 Amps
  • 208 VAC Current Draw: 4.8 Amps
  • 240 VAC Current Draw: 4.2 Amps
  • 277 VAC Current Draw: 3.6Amps
  • Power Drivers: 2x Mean Well HLG-480H-48B 
  • AC Power Cord Length: 6.5 ft
  • DC Extension Cord Length: 7 ft
  • Dimming Range: 5-100%
  • Light Engine Efficacy: 3.26 μmole/J – 2.73 μmole/J
  • Power Driver Efficiency: 95% @ 230 VAC
  • Full System Efficacy: 3.08 μmole/J – 2.58 μmole/J
  • Operating Temperature Range: 41°F – 95°F | 5°C – 35°C
  • Operating Humidity Range: 10 – 90% Non-Condensing
  • Generated Heat Load: 3,412 BTU/Hour
  • Minimum Head Space Above Fixture: 10 in
Note: Growcraft lights have VERY high light output and unless your plants are already acclimated to high light intensity, it is best to start slow with the light hanging high and possibly also dimmed. Then monitor plant reaction over a few days and slowly adjust as needed.